Project 6 Amazon SIOC Test Request Form

    Project 6 is a general simulation test. This procedure is for final destinations in the U.S. Users should be aware of other packaging requirements (configurations, materials, weight and height limits, etc.) for the particular store distribution system of interest.

    Please fill in the blanks below and then choose a test procedure and desired turn-around time so that an accurate quote may be provided.

    Accounts Payable Information (Person receiving Invoice)






    Contact Information (Person receiving report)










    Quote

    Please Provide Quote

    If you would like a quotation to perform the required tests, please complete the test request form and submit in order to receive an accurate quote. If you need assistance completing the input forms or have any questions, I would be glad to help you. Contact Manuel Rosa Jr. at 618-277-1160


    Packaged Product Info



    Choose Packaged-Product Type


    Samples

    Samples should be an untested actual package and product, but if one or both are not available, the substitutes shall be as identical as possible to actual items.

    For Fragile Items: 5 samples

    (Glass / Ceramic / Porcelain / Clay; Liquids / Semi-Liquids / Solids that become liquids at high temperatures [above 70°F])

    For Non-Fragile Items: 1 sample

    Note: In order to ensure testing in perfect condition, products and packages for testing shall be:

    • Adequately over-packaged for shipment OR
    • Repackaged in new packaging at the laboratory
    • Any pallet or skid used in this procedure should be of a type and condition typical of what is used in the field

    Note: It is important to thoroughly document the configuration, materials and construction of the tested product
    and package. Significant variations in performance can sometimes be caused by seemingly insignificant
    differences.


    Characteristics of Pallet Load or Package

    Size









    Product Damage Tolerance and Package Degradation Allowance






    Pre and Post-Test Inspection



    Return Information




    Turn-Around Time

    Our standard turnaround time is 5-10 business days but we do offer an express service which will guarantee test results sooner for an additional charge. Please indicate the desired turnaround time below. The additional charge for the express service is based upon how fast test results are needed. If our work load allows us to get the tests completed sooner than 5 days there will be no express charge.



    * All Express services guarantee test results ONLY in the time frame indicated. Depending on the test series chosen, a full test report may not be possible in which case the test report will typically follow 2 to 3 days following testing.