Home »
ISTA 2A is one of the most commonly requested test procedures from the International Safe Transit Association. It tells you whether a packaged product can survive the basic hazards of shipping before you commit to production, tooling, or a large shipment.
At Pro-Pack Testing Laboratory, we’ve run ISTA procedures for manufacturers and brands since 1982. This guide explains what ISTA 2A tests, which packages it applies to, and how it compares with ISTA 3A, so you can request the right test the first time.
What Is ISTA 2A?
ISTA 2A is a partial simulation performance test for individual packaged products weighing 150 lb (68 kg) or less. It belongs to the ISTA 2 Series, which sits between the basic integrity tests of the 1 Series and the full transit simulations of the 3 Series.
“Partial simulation” means the procedure combines basic integrity tests with at least one element that simulates real transit conditions. The result is a pass/fail verdict on whether your product and package together can withstand normal distribution.
The ISTA 2 Series has three procedures:
- ISTA 2A covers individual packaged products of 150 lb or less.
- ISTA 2B covers packaged products over 150 lb.
- ISTA 2C covers packaged furniture.
What Happens During an ISTA 2A Test
An ISTA 2A test runs your packaged product through a defined sequence. Each step targets a different hazard your package will meet in the supply chain.
- Atmospheric preconditioning. Samples are brought to ambient laboratory conditions so results are consistent and repeatable.
- Atmospheric conditioning. Where required, samples are held at specified temperature and humidity levels to see how heat, cold, or moisture affect the package.
- Compression. A load is applied to the package to simulate the weight of stacking in trucks and warehouses.
- Vibration. The package is vibrated to simulate the bumps and road motion of transport by truck.
- Shock (drops or impacts). The package is dropped or impacted on specified faces, edges, and corners. Drop height and method depend on the package’s weight.
After testing, the product and package are inspected against your acceptance criteria. Those criteria are set before testing begins: for example, no product damage, no loss of function, or no package damage that would make the item unsellable.
Which Products Need ISTA 2A Testing?
ISTA 2A is a good fit when:
- A customer, retailer, or carrier specifies ISTA 2A in their packaging requirements.
- You need a cost-effective benchmark for a new or redesigned package.
- You’re comparing packaging options and want a recognized, repeatable standard.
- Your product weighs 150 lb or less and ships through general distribution.
If your package is going through the small-parcel network (UPS, FedEx, USPS), a customer may require ISTA 3A instead. If you’re not sure, check your customer’s packaging specification or ask us.
ISTA 2A vs. ISTA 3A: What’s the Difference?
This is one of the most common questions we get. Both apply to packages of 150 lb or less, but they’re built for different purposes.
| ISTA 2A | ISTA 3A |
|---|---|---|
Test type | Partial simulation | General simulation |
Built for | General distribution; basic transit hazards | Parcel delivery system shipments |
Vibration | Simpler vibration profile | Random vibration profiles modeled on parcel transport |
Drop sequence | Fewer drops, set by weight | More drops in a defined sequence, by package type |
Typical use | Benchmarking, customer specs, design screening | Shipping through UPS, FedEx, USPS and e-commerce channels |
In short, ISTA 2A confirms a package can handle general transit hazards. ISTA 3A more closely simulates what happens in the parcel network. Read our ISTA 3A Testing Explained guide for the full 3A procedure.
How ISTA 2A Fits With Other ISTA Protocols
ISTA organizes its test protocols into series, from basic integrity tests to custom member procedures:
- 1 Series — non-simulation integrity tests. See ISTA 1A Testing Explained.
- 2 Series — partial simulation tests, including ISTA 2A.
- 3 Series — general simulation tests, including ISTA 3A, 3B, 3E, and 3F.
- 6 Series — member performance tests, such as Amazon’s SIOC protocols.
- 7 Series — development tests for comparing designs.
Our ISTA testing overview explains every series we run.
What You Need to Request an ISTA 2A Test
To get an accurate estimate and avoid delays, have the following ready:
- A completed ISTA Series 2A, 2B and 2C Test Request Form.
- Product and package details: dimensions, gross weight, and packaging materials.
- Your acceptance criteria, or your customer’s specification.
- Test samples with all related components.
- Whether you want samples returned after testing.
Frequently Asked Questions
Is ISTA 2A a certification?
ISTA 2A is a test procedure, not a product certification on its own. A package that passes ISTA 2A at a qualified lab receives a test report documenting the result, which you can share with customers who require it.
Does ISTA 2A include temperature testing?
ISTA 2A includes atmospheric preconditioning, and conditioning at specified temperature and humidity levels where required. Ask us about extreme-condition options if your product ships through hot or cold environments.
Can I run ISTA 2A instead of ISTA 3A?
Only if your customer allows it. If a retailer or carrier specifies ISTA 3A, ISTA 2A won’t satisfy that requirement.
What if my package fails?
A failure shows you where the package is weak before your customers find out. We document what failed and how, so you can redesign and retest.
Request ISTA 2A Testing at Pro-Pack
Pro-Pack Testing Laboratory is an independent, third-party package testing lab about 20 minutes from downtown St. Louis. We’ve helped companies of every size get products to market safely since 1982.
Ready to test? Complete the ISTA Series 2 Test Request Form, or call us at 618-277-1160. Not sure which ISTA test you need? Contact us and we’ll help you choose.
Get Started with ProPack Test Lab:
2385 Amann Drive
Belleville, Illinois 62220
Phone: 618-277-1160
Fax: 618-277-1163

